Wide fender flares wheel arches for Fits: Mitsubishi L200 Warrior, Triton, Animal

Description

This set of arches (4 pieces) are made for the Mitsubishi L200 DOUBLE CABIN, 4-DOOR (WARRIOR, TRITON, ANIMAL), year 2005- 2010. They extend about 8 cm from the side of the vehicle.
Flares for the single and club cab (extra cab) are also available in another listing.
They are made of good quality, hand-laid fiberglass and the surface is black gelcoat (smooth mat). Make sure your car is the model described above and shown in the photos. They will not fit the new facelift bumper edition introduced in 2010. If you are in doubt, send me a few photos of your car showing the front, sides and back. I will reply within a day and let you know if it’s the right model.

Each arch is installed by drilling and screwing 4 self tapping screws through the underside flange. The front and rear screw goes through the fiberglass, holding the ends of the flare snugly against the car wing flange, while the two in between are fitted through sheet metal strips which are fixed on the fiberglass, keeping the flare flange 2 to 3 cm lower than the car wing flange right above the wheel. This way you don’t have to put holes through the arch pockets and the sides of the vehicle, unless you want to. Another screw must go under the lower front end and the lower rear end of the flare (in total 6 screws for each arch). The clearing above the top of the flare flange allows the flare to be flushed on the inside with water so that it doesn’t collect mud and debris.

The arches are best installed by a professional or an experienced amateur. We supply installation tips and detailed photos to your email address.
Installation screws, washers and rubber trim are included in the package.

We ship from Cyprus (member of European Union). Parcels are sent by express or first priority airmail.

Every fiberglass product is made especially for you, after your order. The procedure takes a maximum of 10 business days. Usually, we are ready to ship within 7 to 8 working days. When the items are ready we package and ship them and email the tracking number to you, along with fitting instructions and a series of photos that will help your installer do a perfect installation job.

All kits are sold as unfinished products, prep-work (i.e. sanding, cutting, filling, body work and primer) and painting is required for the best finished look. Items come in gray primer. Professional shop with body kit installation experience recommended.